Eclipse Spyder GT V6-3.0L SOHC (2002)
Ignition Control Module: Component Tests and General Diagnostics
Ignition Power Transistor Continuity Check
NOTE: An analog-type ohmmeter should be used.
NOTE: Connect the negative probe of the ohmmeter to terminal 2.
CAUTION: This test must be performed quickly (in less than 10 seconds) to prevent coil from burning and ignition power transistor from breaking.
Replace the ignition power transistor if there is a malfunction.
Primary Coil and Ignition Power Transistor Continuity Check
PRIMARY COIL AND IGNITION POWER TRANSISTOR CONTINUITY CHECK
NOTE: An analog-type ohmmeter should be used.
NOTE: Connect the negative probe of the ohmmeter to terminal 1.
CAUTION: This test must be performed quickly (in less than 10 seconds) to prevent coil from burning and ignition power transistor from breaking.