Eclipse Spyder GT V6-3.0L SOHC (2002)
Air Bag Module: Removal and Replacement
©AIR BAG MODULES AND CLOCK SPRING
WARNING:
-
Never attempt to disassemble or repair the air bag modules or clock spring. If faulty, replace it.
-
Do not drop the air bag modules or clock spring or allow contact with water; grease or oil. Replace it if a dent, crack, deformation or rust
is detected.
-
The air bag modules should be stored on a flat surface with the pad cover facing upward. Do not place anything on top of it.
-
Do not expose the air bag modules to temperatures over 93 °C (200 °F).
-
After deployment of an air bag, replace the clock spring with a new one.
-
Wear gloves and safety glasses when handing air bags that have already deployed.
-
An undeployed air bag module should only be disposed of in accordance with the procedures.
<Side-airbag module>
For removal and installation of the front seatback assembly with side-airbag module, refer to Front Seat.
Driver's Air Bag Module, Clock Spring