Eclipse Spyder GT V6-3.0L SOHC (2002)
![background image](/mitsubishi/eclipse_spyder_gt/v6-3.0l_sohc/Page-1327003.png)
4. Using special tool MB991007, drive in the dust cover plate until it contacts the projection of the ball joint.
5. Check the dust cover for cracks or damage by pushing it with your finger.
LOWER ARM REAR BUSHING REPLACEMENT
1. Position the lower arm bushing so that its arrow mark point the shown direction.
2. Use the special tool MB991446 to press in the bushing to the shown dimension.