Eclipse Spyder GT V6-3.0L SOHC (2002)
Stabilizer Bar: Service and Repair
Rear
REMOVAL AND INSTALLATION
INSTALLATION SERVICE POINT
>>A<< STABILIZER BAR/BUSHING/STABILIZER BAR BRACKET INSTALLATION
Position the stabilizer bar identification mark to the left side. Adjust the identification mark position as shown in the figure, and tighten the
stabilizer bar bracket mounting bolt.
INSPECTION
^
Check the bushings for wear and deterioration.
^
Check the stabilizer bar for deterioration or damage.
^
Check all bolts for condition and straightness.