Eclipse Spyder GT V6-3.0L SOHC (2002)
1. Use special tool MB991248 or MD998801 to remove the inner shaft assembly and the seal plate from the TJ case.
NOTE: Press the seal plate to deform it, and then press out the inner shaft.
2. Use special tool MB991248 or MD998801 to remove the inner shaft from the center bearing bracket.
>>B<< CENTER BEARING REMOVAL
Use special tools MB990930 and MB990938 to press the center bearing out from the center bearing bracket.
>>C<< TJ BOOT REMOVAL
Wrap plastic tape around the spline part on the BJ assembly so that the TJ boot is not damaged when they are removed.
REASSEMBLY SERVICE POINTS
