Endeavor V6-3.8L SOHC (2004)
CAUTION: Do not allow engine oil or other grease to adhere to the O-ring
Insert the O-ring to the water pipe, and coat the outer portion of the O-ring with water or engine coolant.
>>B<< ENGINE COOLANT TEMPERATURE SENSOR INSTALLATION
Apply the specified sealant to the thread of the engine coolant temperature sensor, and then tighten it to the specified torque.
Specified Sealant: 3M AAD part number 8371 or equivalent
>>C<< RADIATOR UPPER HOSE CONNECTION
1. Insert each hose as far as the projection of the water outlet fitting.
2. Align the mating marks on the radiator hose and hose clamp, and then connect the radiator hose.
INSPECTION
Water Pipe and Hose Check
Check the water pipe and hose for cracks, damage and clogs. Replace them if necessary.
