Timing Belt: Specifications
- Make
- Mitsubishi
- Model
- Endeavor
- Engine
- V6-3.8L SOHC
- Year
- 2004
- Section
- Timing Belt › Specifications
MaintenanceSpecifications · page 1 of 9
Timing Belt: Specifications
Timing Belt Adjusting Bolt ................................................................................................................................................ 5.0 ± 1.0 Nm (44 ± 9 in. lbs.)
Install the timing belt on each sprocket and pulley in sequence. Do not leave the belt slack between each sprocket and pulley.
-
Crankshaft sprocket
-
Idler pulley
-
Left bank camshaft sprocket
-
Water pump pulley
-
Right bank camshaft sprocket
-
Tensioner pulley
Pinch or Ctrl + scroll to zoom. Double-tap to reset.
Parts & tools for this job For 2004 Mitsubishi Endeavor 3.8L
- PARTTiming belt kitSearch: Mitsubishi Endeavor 2004 3.8L timing belt kit
- TOOLEngine timing tool setSearch: Mitsubishi engine timing tool set
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.