Endeavor V6-3.8L SOHC (2004)
Fuel Injector: Testing and Inspection
Injector Check
INJECTOR CHECK
<Right bank side (number 1, 3, 5 cylinders)>
1. Disconnect the intermediate connector B-32.
2. Measure the resistance between the injector intermediate connector terminals.
3. Connect the injector intermediate connector.
<Left bank side (number 2, 4, 6 cylinders)>
1. Disconnect the injector connector.
2. Measure the resistance between injector side connector terminals 1 and 2.
Standard value: 10.5 - 13.5 Ohms [at 20 °C (68 °F)]
3. Connect the injector connector.
