Endeavor V6-3.8L SOHC (2004)
DANGER: Wait at least 60 seconds after disconnecting the battery cable before doing any further work. (Refer to Service Precautions).
WARNING: Battery posts, terminals and related accessories contain lead and lead compounds. WASH HANDS AFTER HANDLING.
Disconnect the negative (-) battery cable from the battery and tape the terminal to prevent accidental connection and air bag(s) deployment.
[[B]] CONNECTOR (FOR AIR BAG MODULE) REMOVAL
Slide the outer housing of the clock spring or front passenger's air bag module connector in the arrow direction shown, and disconnect the connector.
[[C]] AIR BAG MODULE ASSEMBLY REMOVAL
WARNING:
-
The air bag module must not be measured with such equipment as an ohmmeter.
-
The air bag module must not be disassembled.
-
The removed air bag module should be stored in a clean, dry place with the deployment surface facing up.
Loosen the torx screw and remove the air bag module assembly.
[[D]] STEERING WHEEL ASSEMBLY REMOVAL
Use special tool MB990803 to remove the steering wheel.
[[E]] CLOCK SPRING REMOVAL
WARNING: The removed clock spring should be stored in a clean, dry place.
[[F]] AIR BAG MODULE REMOVAL (FRONT PASSENGER'S SIDE)