Endeavor V6-3.8L SOHC (2004)
2. Use an Allen wrench to counterhold the piston rod end, and use special tool MB991109 to loosen the coil spring nut.
ASSEMBLY SERVICE POINTS
>>A<< COIL SPRING INSTALLATION
CAUTION: Do not use an impact wrench to tighten the bolt of special tool MB991237. It will break the special tool.
1. Use special tools MB991237 and MB991239 to compress the coil spring, and install it to the spring seat of the shock absorber.
2. Align the end of the coil spring with the stepped section of the spring seat of the shock absorber.
>>B<< SHOCK ABSORBER INSULATOR INSTALLATION
Position a center line (A) of the shock absorber lower bushing inner pipe as shown from the arrow (B) on the shock absorber insulator. Then install
the shock absorber insulator.
>>C<< COIL SPRING NUT INSTALLATION
