Endeavor 2WD V6-3.8L (6G75) (2008)
4. Disconnect the negative battery terminal.
5. Measure the resistance between special tool MB991970 (ABS check harness) connector terminal 7 and body ground.
OK: 1 kohm or more
Q: Does the resistance measure 1 kohm or more?
YES : [The resistance measures 1 kohm or more] Diagnose CAN bus lines thoroughly by referring to Diagnostic Item 18. See: Diagnostic Item
18
NO : [The resistance measures less than 1 kohm] Replace the ABS/TCL-ECU.
Part 1
DIAGNOSTIC ITEM 7: Diagnose Shorts In The Ground To CAN Bus Line [Vehicles With ASC And Vehicles Without Multi-center Display
(middle-grade Type Or Vehicles With Mitsubishi Multi Communication System)]
CAUTION: When servicing a CAN bus line, ground yourself by touching a metal object such as an unpainted water pipe. If you fail to do so, a
component connected to the CAN bus line may be damaged.