Endeavor 2WD V6-3.8L (6G75) (2008)
/Page-568696.png)
CAUTION: The strand end of the twist wire should be within 10 cm (4 inches) from the connector.
Q: Are ABS/TCL-ECU connector A-02 and powertrain control module connector B-18 in good condition?
YES : Go to Step 25.
NO : Repair the damaged parts.
STEP 25. Using scan tool MB991958, diagnose the CAN bus line (Disconnect powertrain control module connector B-18, and check the
powertrain control module system).
1. Disconnect powertrain control module connector B-18.
2. Turn the ignition switch to the "ON" position.