Endeavor 2WD V6-3.8L (6G75) (2008)
Trailing Arm Bushing: Service and Repair
*This document updated per TSB #08-27-005
REAR SUSPENSION BUSHING REPLACEMENT
Required Special Tool:
- MB9921O7: Rear suspension bushing replacer
Removal:
1. Remove the shock absorber assembly stabilizer link connection nut and lower arm assembly.
2. Use special tool MB9912107 to remove the bushing as shown in the illustration.
Installation:
Press in the bushing until its end is flush with the knuckle by observing through the cut-off part of the special tool.