Expo AWD L4-2350cc 2.4L SOHC 16 Valve (1993)
Steering Wheel: Service and Repair
Refer to Technician Safety Information for Air Bag Arming and Disarming.
1. Remove horn pad assembly.
2. Remove spring holder.
3. Remove steering wheel using a suitable steering wheel puller. Do not hammer on steering column to remove it, doing so may damage
collapsible mechanism.
4. Reverse procedure to install, noting following:
Fig. 6 Spring Holder Installation
a. Install spring clip as shown in Fig. 6.
b. Press downward on horn pad to install it on steering wheel.