Expo AWD L4-2350cc 2.4L SOHC 16 Valve (1993)
Suspension Spring ( Coil / Leaf ): Service and Repair
1. Raise and support vehicle.
2. Remove rear stabilizer bar as outlined under Stabilizer Bar.
3. Remove shock absorber as outlined under Shock Absorber.
4. Disconnect driveshaft from differential carrier and support aside.
5. Disconnect speed sensor clamp bolt.
6. Lower jack used to support lower arm and remove coil spring.
7
Remove spring seat.
8. Reverse procedure to install, ensuring coil spring seat properly into spring seat grooves.
