Expo AWD L4-2350cc 2.4L SOHC 16 Valve (1993)
Differential Carrier: Service and Repair
Limited Slip Differential
Inspection Before Disassembly
1. Secure differential case assembly in a vise so that differential right side gear is facing upward. When securing in vise, ensure not to hold
differential case assembly to tightly.
Fig. 37 Feeler Gauge Insertion
2. Insert a 0.0012 inch feeler gauge at two places between differential case B and right thrust washer, Fig. 37. Do not insert a feeler gauge in oil
groove of differential case B.