Expo LRV AWD L4-2350cc 2.4L SOHC 16 Valve (1993)
Tachometer Connection
1. Connect a tachometer. If using a primary current pulse detection type tachometer, insert a paper clip into the back side of the 1-pin harness
connector, as shown above, then connect a tachometer to the paper clip.
DO NOT disconnect the electrical connector.
CAUTION:If the paper clip is inserted incorrectly, it may become caught and cannot be remove without damaging the connector.
Fig. 1 Diagnosis Connector View
3. With the engine stopped, ground the diagnosis control terminal (Fig. 1).