Expo LRV AWD L4-2350cc 2.4L SOHC 16 Valve (1993)
Alignment: Service and Repair
Front Wheel Alignment
Camber
Camber is preset during production and is not adjustable. If camber is out of specification, replace bent or damaged components.
Caster
Caster is preset during production and is not adjustable.
Toe-In
Fig. 1 Front Toe-In Adjustment
1. Adjust toe-in by loosening clips and turning left and right tie rod turnbuckles equally in opposite directions. Refer to Fig. 1.
2. To increase toe-out, turn left turnbuckle toward front of vehicle and right turnbuckle toward rear of vehicle. To increase toe-in, turn turnbuckles in
other direction.
3. Amount of toe-in adjustment is 0.24 inch for each half turn of left and right tie rods.