FE120 L4-4.9L DSL Turbo (2005)
-
If any measurement IS out of specification, replace the sensor.
#319 Inspection of common rail pressure sensor
-
The sensor cannot easily be inspected in isolation, so you must evaluate it indirectly by inspection of system harnesses and related parts.
-
If there is no abnormality in any related part but the system is abnormal, replace the common rail.
#320 Inspection of cylinder recognition sensor
-
Measure the resistance between terminals 2 and 3.
Standard value: 200 to 1800 ohms
-
If the measurement is out of specification, replace the sensor.
#323 Inspection of fuel temperature sensor
-
Measure the resistance between terminals 1 and 2.
-
If any measurement is out of specification, replace the sensor.
#324 Inspection of accelerator pedal position sensor