FE120 L4-4.9L DSL Turbo (2005)
#305 Inspection of boost air temperature sensor
-
Place the boost air temperature sensor in a container filled with engine oil.
-
Heat the oil to each of the specified temperatures. Stir the oil well while doing so.
-
Measure the resistance between terminals 1 and 2.
-
If either measurement IS out of specification, replace the sensor.
#318 Inspection of boost pressure sensor
-
Apply 5 V DC to terminals 3 and 1.
-
Apply air pressure A. Gradually increase it and, while doing so, measure the output voltage occurring at terminals 2 and 1 (see the diagram).