Galant L4-1997cc 2.0L DOHC (1990)
Figure 4
The rotor can be indexed to multiple positions. See Figure 4.
NOTE:
The wheel nuts must be installed and torqued to specs each time the rotor is indexed!
Figure 5
After each indexing of the rotor on its hub, measure the run-out with a dial indicator (Figure 5). If run-out is within specifications, replace the brake pads
as described below. If run-out exceeds specifications in all positions, replace the hub before replacing the brake pads.
HUB REPLACEMENT
Replace the hub as described in the Service Manual - but only if rotor run-out exceeds specifications.