Galant L4-1997cc 2.0L DOHC (1990)
3. Turn the key to the OFF position and disconnect the ECU connectors.
4. Using an ohm meter check for continuity between ECU harness terminal 65 and relay harness terminal 2.
Continuity
Should exist
If any of the previous tests produce unsatisfactory results, the harness will need to be repaired or replaced. Once repairs have been completed,
confirm that the repair has corrected the problem.
If the trouble returns, it is possible that there is an intermittent failure of the component or the ECU. Check for looseness at all harness junctions and
test for an intermittent failure.
