mitsubishi Workshop Repair Guides

Mitsubishi Workshop Service and Repair Manuals

ABOUT US
Idle Air Control Motor (Stepper Motor) <--> [Idle Speed/Throttle Actuator - Electronic]|Specifications|Page 3055 > < Idle Air Control Motor (Stepper Motor) <--> [Idle Speed/Throttle Actuator - Electronic]|Specifications|Page 3053

Galant L4-1997cc 2.0L DOHC (1990)

Page 1
background image

Idle Air Control Motor (Stepper Motor): Testing and Inspection

Idle Speed Control (ISC) Servo Circuit

Use the following procedures to test the ISC Servo:

COMPONENT TEST

1. Disconnect the ISC servo connector.

Idle Speed Control (ISC) Servo Resistance Test

2. Using an  Ohm meter, check the resistance between terminals 2 and either 1 or 3.

Resistance: .............................................................................................................................................................................  28 - 33  Ohms @68°F 

Idle Air Control Motor (Stepper Motor) <--> [Idle Speed/Throttle Actuator - Electronic]|Specifications|Page 3055 > < Idle Air Control Motor (Stepper Motor) <--> [Idle Speed/Throttle Actuator - Electronic]|Specifications|Page 3053