Galant L4-1997cc 2.0L DOHC (1990)
Steering Shaft: Technical Service Bulletins
Steering - Removal of Column Shaft
NO.
TSB-91-37-002
DATE
February, 1991
MODEL
1989-91 Galant, 1990-91 Eclipse
SUBJECT: REMOVAL OF STEERING COLUMN SHAFT COMPONENTS:
SERVICE MANUAL SUPPLEMENT
TSB Revision TSB 91-37-002
PURPOSE
This bulletin supplements disassembly procedures for the steering shaft assembly after its removal from vehicle. As a reference to this bulletin, please
insert the TSB Revision number in the box at the bottom of page 37-18 (1990 Eclipse Service Manual) and page 37A-28 (1989/90/91 Integrated Galant
Service Manual).
Figure 1. Boot Removal.
DESCRIPTION
When removing the boot, cover, and bearing from the steering shaft assembly, use the following procedure:
1. To remove the boot, apply a thick coat of multi-purpose grease to its internal surface and to the external surface of the shaft joint. Slide the boot over
the joint in the direction of the arrows (Figure 1).
Figure 2. Bearing Removal.
2.
Using hand pressure, unseat the two-piece bearing from the center of the steering cover. Remove bearing in the direction of the arrows (Figure 2).