Galant DE L4-2350cc 2.4L SOHC MFI (2000)
STEP 3. Check the headlight relay (high).
If the headlight relay (high) is damaged, replace it.
The headlights (high-beam) should illuminate normally.
If the headlight relay (high) is not damaged, go to Step 4.
STEP 4. Check the headlight relay (high) power supply circuit at the headlight relay (high) connector A-07X.
1. Disconnect the headlight relay (high) connector A-07X and measure at the relay box side.
2. Voltage between terminal 4 and ground.
-
Voltage should be approximately 12 volts (battery positive voltage).
3. Voltage between terminal 3 and ground.
-
Voltage should be approximately 12 volts (battery positive voltage).
If one of the measurements above does not show approximately 12 volts, go to Step 5.
If both of the measurements above show approximately 12 volts, go to Step 7.
STEP 5. Check the headlight relay (high) connector A-07X for damage.
If the headlight relay (high) connector A-07X is damaged, repair or replace it. Refer to Harness Connector Inspection.
The headlights (high-beam) should illuminate normally.