Galant DE L4-2350cc 2.4L SOHC MFI (2000)
STEP 3. Check key reminder switch connector C-59 for damage.
If harness connector C-59 is damaged, repair or replace it.
Refer to Harness Connector Inspection.
If harness connector C-59 is in good condition, go to Step 4.
STEP 4. Check the harness wires between key reminder switch connector C-59 and ETACS-ECU connector C-82
If the harness wires between key reminder switch connector C-59 and ETACS-ECU connector C-82 are damaged, repair them. Check that the
malfunction is eliminated.
If the harness wires are in good condition, go to Step 5.
STEP 5. Check the harness wires between key reminder switch connector C-59 and body ground.
If the harness wires between key reminder switch connector C-59 and body ground are damaged, repair them. Check that the malfunction is eliminated.
If the harness wires are in good condition, replace the
ETACS-ECU.
CAUTION: To prevent damage to scan tool MB991502, make sure that the ignition switch is "OFF" before connecting or disconnecting the scan tool.
STEP 6. Check the input signal from the driver's door switch, using either the scan tool or a voltmeter.
