mitsubishi Workshop Repair Guides

Mitsubishi Workshop Service and Repair Manuals

Initial Inspection and Diagnostic Overview|Page 3205 > < Initial Inspection and Diagnostic Overview|Page 3203
Page 218
background image

STEP 3. Check trunk lid latch switch connector F-21 for damage.

If the trunk lid latch switch connector F-21 is damaged, repair or replace it. Refer to Harness Connector Inspection.

The input signal from the trunk lid latch switch should be able to be checked and the theft-alarm system should be armed normally.

If the connector is in good condition, go to Step 4.

STEP 4. Check the harness wires between trunk lid latch switch connector F-21 and ground.

NOTE:  For 1999 models, after checking intermediate connector F-16, check the wires. If intermediate connector F-16 is damaged, repair or replace it.
Refer to Harness Connector Inspection.

If the harness wires between trunk lid latch switch connector F-21 and ground are damaged, repair them.

The input signal from the trunk lid latch switch should be able to be checked and the theft-alarm system should be armed normally.

STEP 5. Check the trunk lid latch switch connector F-21 and ETACS-ECU connector C-81 for damage.

If the trunk lid latch switch connector F-21 and ETACS-ECU connector C-81 are damaged, repair or replace them. Refer to Harness Connector
Inspection.

Initial Inspection and Diagnostic Overview|Page 3205 > < Initial Inspection and Diagnostic Overview|Page 3203