Galant LS V6-3.0L SOHC (1999)
STEP 3. Check the harness wires between ETACS-ECU connector C-86 and battery.
NOTE: After checking junction block connector C-84 and intermediate connector C-66, check the wires. If junction block connector C-84 and
intermediate connector C-66 are damaged, repair or replace them. Refer to Harness Connector Inspection.
If the harness wires between ETACS-ECU connector C-86 and battery are damaged, repair them.
The functions, which are described in the "Technical Description (comment)," should work normally.