Mitsubishi Workshop Service and Repair Manuals

Throttle Position Sensor: Specifications

Base Ignition Timing [1]........................................................................................................................................................................ 5°±2° BTDC at idle

Fuel Injector Coil Resistance

At 20°C (68°F).............................................................................................................................................................................................. 2 - 3  Ohms

Fuel Pressure Control Valve [1] 

At 20°C (68°F)........................................................................................................................................................................................... 36- 44  Ohms

 
Idle Speed Control (Stepper Motor) Resistance

At 20°C (68°F).......................................................................................................................................................................................... 28 - 33  Ohms

Throttle Position Sensor Adjustment Voltage

At curb Idle........................................................................................................................................................................................... 0.48 - 0.52 Volts

Throttle Position Sensor Resistance  ........................................................................................................................................................ 3.5 - 6.5 K Ohms

Wastegate Solenoid Valve [1] 

At 20°C (68°F).......................................................................................................................................................................................... 36 - 44  Ohms

[1] Refer to ADJUSTMENT PROCEDURES.
[2] Not adjustable.