mitsubishi Workshop Repair Guides

Mitsubishi Workshop Service and Repair Manuals

Throttle Body|Specifications|Page 3212 > < Throttle Body|Specifications|Page 3210
Page 2
background image

Purge Port Vacuum Curve

2. 

Start the engine and check to see that, after increasing the engine speed, vacuum remains fairly constant.

NOTE:  If there is a problem with the changes in vacuum in either test, it is probable that the throttle body requires cleaning. Refer to COMPONENT
REPLACEMENT AND REPAIR PROCEDURES

For diagnosis and testing of the motor position sensor (MPS), idle switch, throttle position sensor (TPS) and the idle speed control (ISC) servo, refer to 
COMPUTERIZED ENGINE CONTROLS.

Throttle Body|Specifications|Page 3212 > < Throttle Body|Specifications|Page 3210