Galant VR4 AWD L4-1997cc 2.0L DOHC Turbo (1992)
Fig. 1 Power Transistor Test
NO. 1 & NO. 4 COIL SIDE
1. Disconnect the power transistor connector.
2. Connect a power supply of 1.5v (one dry cell) between power transistor terminals 6 (+) and 3 (-).
3. Check for continuity between terminals 7 (+) and 3 (-).
Continuity: .............................................................................................................................................................................................. Should exist
4. Remove power from terminals 6 and 3.
5. Check for continuity between terminals 7 (+) and 3 (-).
Continuity: ........................................................................................................................................................................................ Should not exist
Fig. 2 Power Transistor Test
NO. 2 & NO. 3 COIL SIDE
1. Disconnect the power transistor connector.
2. Connect a power supply of 1.5v (one dry cell) between power transistor terminals 2 (+) and 3 (-).
3. Check for continuity between terminals 1 (+) and 3 (-).
Continuity: .............................................................................................................................................................................................. Should exist
4. Remove power from terminals 2 and 3.
5. Check for continuity between terminals 1 (+) and 3 (-).
Continuity: ........................................................................................................................................................................................ Should not exist
If the Power Transistor fails any of these tests, replace the Power Transistor.
IGNITION COIL