Galant VR4 AWD L4-1997cc 2.0L DOHC Turbo (1992)
Technical Service Bulletin # EMR92003
Date: 920101
Recall - Replacement of The Oxygen Sensor
NO.:
EMR-92-003
DATE
January, 1992
MODEL
1991-1992 Galant VR-4
SUBJECT:
1991 - 1992 CALIFORNIA GALANT VR4
EMISSION RECALL
PURPOSE
This bulletin provides a detailed procedure for inspection and repair of the emission control system on certain turbocharged 1991 and 1992 2.0L
California Galant VR-4 models. A letter has been sent to all owners of the affected vehicles telling them to return their vehicles to their Mitsubishi
Motors dealer to have the engine serviced. A copy of this letter is shown in this bulletin.
Please note that the customer is not to be charged for the repairs covered by this bulletin. To achieve the desired results, the procedure MUST be
followed EXACTLY as described in this bulletin.
IMPORTANT NOTICE
All dealerships MUST perform all steps as described in this bulletin. Incomplete repairs will lead to emissions non-compliance and obvious customer
dissatisfaction. The California Air Resources Board ("CARB") may survey the results of this campaign several months after starting. If incomplete
repairs or non-compliance is found, another recall could be ordered or other action undertaken by CARB. In addition, California residents who own an
affected vehicle may be required to send in a Vehicle Emission Recall - Proof of Correction form to the California Department of Motor Vehicles
(DMU) as evidence of recall completion when they apply for vehicle registration renewal. Each customer whose vehicle is registered within California
MUST be given a completed Vehicle Emission Recall - Proof of Correction form after the recall has been completed.
AFFECTED VEHICLES
This procedure applies to 1991 and 1992 California 2.0L turbocharged California Galant VR-4 models equipped with manual transmissions without
limitation as to mileage. It does not apply to any other models.
Required Operations
1.
Replace the Oxygen Sensor.
2.
Complete and affix the "Emission Recall Completed" label.
3.
Clear any diagnostic codes stored in the MPI system's ECU using the Multi-Use Tester.
4.
Complete a Vehicle Emission Recall - Proof of Correction form.
Parts Information
Emission Kit:
MD191390
Required on each claim. No other parts are allowed to be claimed.
Warranty Information
Submit as Recall Claim type "C", Menu option "E-5" on your Diamond Network System. Do NOT submit as "W" claims!
Required Operation
Labor Operation Code:
C9204XXX
Time allowance:
0.2 hr.
Note:
The "O" in the above labor code is the number ZERO. A sample required work claim is shown in SAMPLE DIRECT ENTRY RECALL
CLAIM.
Materials and Special Tools