Galant VR4 AWD L4-1997cc 2.0L DOHC Turbo (1992)
6. Place the transmission in PARK, reconnect the inhibitor switch connector and disconnect the ECU connector.
7. Turn the key to the START position and check the voltage between ECU harness connector terminal 108 and ground.
Voltage:
8 or more volts.
If any of the previous tests produce unsatisfactory results, the harness will need to be repaired or replaced. Once repairs have been completed, road
test the vehicle to confirm that the repair has corrected the problem.
If the same problem reoccurs, it is possible that there is an intermittent failure of the component or the ECU. Check for looseness at all harness
junctions and test for an intermittent failure.
