Galant VR4 AWD L4-1997cc 2.0L DOHC Turbo (1992)
SYNCHRONIZER SLEEVE AND HUB
-
Mate the synchronizer sleeve with the hub and check to see if they slide smoothly.
-
Check to see if the sleeve is free from damage at its inside front and rear ends.
-
Check the hub front and rear end faces (in contact with each speed gear) for wear.
CAUTION: When replacement is necessary, replace the synchronizer hub and sleeve as a set.
SYNCHRONIZER KEY AND SPRING
-
Check the synchronizer key center protrusion for wear.
-
Check the spring for proper tension, possible deformation and breakage.
SPEED GEARS
-
Check the bevel and clutch gear teeth for damage and wear.
-
Check the synchronizer cone for rough surfaces, damage, and wear.
-
Check the gear bore and front and rear ends for damage and wear.
SERVICE POINTS OF REASSEMBLY
12. INSTALLATION OF SYNCHRONIZER SPRINGS
