Galant VR4 AWD L4-1997cc 2.0L DOHC Turbo (1992)
Using the special tool, remove the taper roller bearing, the 1st speed gear, and the bearing sleeve.
CAUTION:
1. Do not reuse the bearing if it has been removed from the shaft.
2. Replace the inner and outer races of the taper roller bearing as a set.
10. REMOVAL OF 1ST-2ND SPEED SYNCHRONIZER HUB /12. 2ND SPEED GEAR
Using the special tool, remove the 1st-2nd speed synchronizer assembly and 2nd speed gear.
14. REMOVAL OF TAPER ROLLER BEARING
Using the special tool, remove the taper roller bearing.
CAUTION:
1. Do not reuse the bearing if it has been removed from the shaft.
2. Replace the inner and outer races of the taper roller bearing as a set.