Lancer L4-2.0L (4B11) (2008)
Cruise Control Switch: Testing and Inspection
Main Switch
AUTO-CRUISE CONTROL SWITCH CHECK
AUTO-CRUISE CONTROL MAIN SWITCH CHECK
1. Check that the "CRUISE" indicator light within the combination meter illuminates when the "ON/OFF" (MAIN) switch is switched "ON".
2. Press the "ON/OFF" (MAIN) switch again, and check that the "CRUISE" indicator light within the combination meter goes out.
AUTO-CRUISE CONTROL SETTING
1. Switch the "ON/OFF" switch to "ON".
2. Drive at the desired speed, above approximately 40 km/h (25 mph).
3. Push the "COAST/SET" switch.
4. Check to be sure that when the "COAST/SET" switch is released the speed is the constant speed.