Lancer L4-2.0L (4B11) (2008)
YES : Check the power supply circuit of the SRS-ECU. Refer to SRS Troubleshooting.
NO : Repair the wiring harness between joint connector (CAN1) C-06 and SRS-ECU connector C-122.
Diagnostic Item 14
DIAGNOSTIC ITEM 14: Diagnose when the scan tool cannot receive the data sent by occupant classification-ECU.
CAUTION: When servicing a CAN bus line, ground yourself by touching a metal object such as an unpainted water pipe. If you fail to do so, a
component connected to the CAN bus line may be damaged.
CAN Communication Circuit (Part 1)