Lancer L4-2.0L (4B11) (2008)
REMOVAL AND INSTALLATION
WARNING
-
Never attempt to disassemble or repair the side impact sensor. If faulty, replace it.
-
Do not drop or subject the side impact sensor to impact or vibration. Replace the side impact sensor, if dents, cracking, deformation, or
rust are present.
-
Replace the side impact sensor after the side and curtain air bag has deployed.
Pre-Removal Operation
Removal Steps 1-3
NOTE: The illustration above shows the side impact sensor (LH). The position of the side impact sensor (RH) is symmetrical to this.
REMOVAL SERVICE POINTS
[[A]] NEGATIVE (-) BATTERY CABLE DISCONNECTION
DANGER : Wait at least 60 seconds after disconnecting the battery cable before doing any further work.
WARNING: Battery posts, terminals and related accessories contain lead and lead compounds. WASH HANDS AFTER HANDLING.