Lancer L4-2.0L (4B11) (2008)
Ball Joint: Service and Repair
Lower Arm Ball Joint Dust Cover Replacement
LOWER ARM BALL JOINT DUST COVER REPLACEMENT
Only when the dust cover is damaged accidentally during maintenance, replace the dust cover as follows:
1. Remove the dust cover.
2. Fill and apply the multi-purpose grease into the inside and lip of the dust cover.
3. Use the special tool ball joint removal & installer (MB990800) to drive in the dust cover to the point where it contact with the lower arm
assembly.
4. Using your fingers, press the dust cover to check for a crack or damage.