Lancer L4-2.0L SOHC (2004)
3. Using the letter symbols in the table shown, install the upper oil pan using the correct bolt. Refer to the table for proper torque.
>>B<< LOWER OIL PAN INSTALLATION
1. With scraper or wire brush, etc., remove residual gasket sealant from the attached on lower oil pan.
2. Apply sealant on the mounting surface of lower oil pan without any gap as indicated in the figure, and install lower oil pan to the upper oil pan.
Specified sealant: 3M AAD Part No.8672, 8704, 3M AAD Part No.8679/8678 or equivalent