Lancer L4-2.4L (4B12) (2009)
Loosen the camshaft bearing cap mounting bolts in the order of number shown in the figure in four or five steps, and remove the camshaft bearing
caps.
[[E]] CYLINDER HEAD BOLT/CYLINDER HEAD BOLT ASSEMBLY REMOVAL
Loosen and remove the cylinder head bolts in two or three steps in the order of number shown in the figure.
INSTALLATION SERVICE POINTS
]]A[[ CYLINDER HEAD GASKET/CYLINDER HEAD ASSEMBLY INSTALLATION
CAUTION
Do not allow any foreign materials get into the coolant passages, oil passages and cylinder.