Lancer L4-2.4L SOHC (2005)
<<B>> REAR BRAKE CHAMBER RETAINER REMOVAL
Part 2 Of 2
Use a flat-tipped screwdriver or a similar tool to open up the rear brake chamber retainer joint. Then remove the rear brake chamber retainer.
INSTALLATION SERVICE POINTS
>>A<< REAR BRAKE WASHER INSTALLATION
Install the rear brake washer in the direction shown in the illustration.
>>B<< REAR BRAKE CHAMBER RETAINER INSTALLATION
Use pliers or a similar tool to close the rear brake chamber retainer end onto the pin.
>>C<< SHOE SLACK ADJUSTER INSTALLATION
Install the shoe slack adjuster so that the shoe adjusting bolt for the left rear wheel is attached towards the front of the vehicle, and the shoe
adjusting bolt for the right rear wheel is towards the rear of the vehicle.
>>D<< SHOE RETURN SPRINGS INSTALLATION
