Lancer L4-2.4L SOHC (2005)
4. When the "CRUISE" (MAIN) switch is turned to the "OFF" while driving at constant speed, check if normal driving is resumed and deceleration
occurs.
AUTO-CRUISE CONTROL SWITCH CHECK
1. Remove the auto-cruise control switch.
2. Measure the resistance between terminal 2 and terminal 3 when each of the "COAST/SET", "ACC/RES", "CANCEL" and "CRUISE" (MAIN)
switches is pressed. If the values measured at the time correspond to those in the table, the resistance values are correct.