Lancer L4-2.4L SOHC (2005)
Cruise Control Switch: Testing and Inspection
AUTO-CRUISE CONTROL SWITCH CHECK
AUTO-CRUISE CONTROL MAIN SWITCH CHECK
1. Turn the ignition switch to the "ON" position.
2. check that the "CRUISE"indicator light within the combination meter illuminates when the "CRUISE" (MAIN) switch is switched "ON".
AUTO-CRUISE CONTROL SETTING
1. Switch "ON" the "CRUISE" (MAIN) switch.
2. Drive at the desired speed, above approximately 40 km/h (25 mph).
3. Push the auto-cruise control switch in the direction of arrow.
4. check to be sure that when the switch is released the speed is the desired constant speed.
NOTE: If the vehicles speed decreases to approximately 15 km/h (9 mph) below the set speed because of climbing a hill for example, the
auto-cruise control will be cancelled.
SPEED-INCREASE SETTING
