Lancer L4-2.4L SOHC (2005)
Harmonic Balancer - Crankshaft Pulley: Service and Repair
CRANKSHAFT PULLEY
REMOVAL AND INSTALLATION
REMOVAL SERVICE POINTS
<<A>> DRIVE BELT REMOVAL
The following operations will be needed due to the introduction of the serpentine drive system with the drive belt auto-tensioner.
1. Securely insert the spindle handle or ratchet handle with a 12.7 mm (1/2-inch) insertion angle into the jig hole of the auto-tensioner.
2. Rotate the auto-tensioner counterclockwise and align hole A with hole B.