Lancer L4-2.4L SOHC (2005)
REMOVAL AND INSTALLATION
REMOVAL SERVICE POINT
<<A>> RADIATOR LOWER HOSE DISCONNECTION
Make mating marks on the radiator hose and the hose clamp. Disconnect the radiator hose.
INSTALLATION SERVICE POINTS
>>A<< THERMOSTAT CASE ASSEMBLY INSTALLATION
1. Use a gasket scraper or wire brush to completely eliminate all gasket material on the gasket mounting surface.
2. Apply a bead of the sealant to the cylinder head mating surface of the thermostat case as shown.
Specified Sealant: 3M(TM) AAD part No.8672, 3M(TM) AAD part No.8679/8678 or equivalent