Lancer L4-2.4L SOHC (2005)
1. Use special tool MD998781 to secure the flywheel assembly or A/T drive plate.
2. Remove the flywheel bolts or A/T drive plate bolts.
INSTALLATION SERVICE POINTS
>>A<< CRANKSHAFT REAR OIL SEAL INSTALLATION
1. Apply a small amount of engine oil to the entire inner diameter of the oil seal lip.
2. Use special tools MB990938 and MD998776 to press-fit the oil seal.
>>B<< FLYWHEEL BOLTS/ A/T DRIVE PLATE BOLTS INSTALLATION
1. Use special tool MD998781 to secure the flywheel assembly or A/T drive plate in the same manner as removal.
2. Tighten the flywheel bolts or A/T drive plate bolts to the specified torque.
Tightening torque: 132 ± 5 Nm (98 ± 3 ft. lbs.)
>>C<< CRANKSHAFT FRONT OIL SEAL INSTALLATION
1. Apply a small amount of engine oil to the outer diameter of special tool MD998285 and install it to the crankshaft.
2. Apply a small amount of engine oil to the entire inner diameter of the oil seal lip.
3. Use special tool MD998375 to press-fit the oil seal.
>>D<< CRANKSHAFT BALANCER SHAFT DRIVE SPROCKET INSTALLATION