Lancer L4-2.4L SOHC (2005)
Q: Is ETACS-ECU connector C-226 in good condition?
YES: Go to Step 13.
NO: Repair or replace the damaged component(s). Refer to Harness Connector Inspection. Verify that all the doors can be locked and unlocked
normally.
STEP 13. Check the wiring harness from ETACS-ECU connector C-226 (terminal 12 and 13) and door lock actuator (rear: LH) connector E-07
(terminal 3 and 2).
NOTE: Also check junction block connector C-217 and inter- mediate connector D-15 for loose, corroded, or damaged terminals, or terminals pushed
back in the connector. If junction block connector C-217 or intermediate connector D-15 are damaged, repair or replace the damaged component(s) as
described in Harness Connector Inspection.
Q: Is the wiring harness between ETACS-ECU connector C-226 (terminal 12 and 13) and door lock actuator (rear: LH) connector E-07 (terminal 3 and
