Lancer L4-2.4L SOHC (2005)
STEP 14. Check the wiring harness between power window relay connector C-224 (terminal 4) and power window main switch connector E-05
(terminal 10).
NOTE: Also check junction block connector C-211 and intermediate connector C-17 for loose, corroded, or damaged terminals, or terminals pushed
back in the connector. If junction block connector C-211 or intermediate connector C-17 are damaged, repair or replace the damaged component(s) as
described in Harness Connector Inspection.
Q: Is the wiring harness between power window relay connector C-224 (terminal 4) and power window main switch connector E-05 (terminal 10) in
good condition?
YES: Replace the ETACS-ECU. Verify that the power windows work normally.
NO: The wiring harness may be damaged or the connector(s) may have loose, corroded or damaged terminals, or terminals pushed back in the
connector. Repair the wiring harness as necessary. Verify that the power windows work normally.
Inspection Procedure D-2
Power Windows: The power window timer function does not work normally.
