mitsubishi Workshop Repair Guides

Mitsubishi Workshop Service and Repair Manuals

Initial Inspection and Diagnostic Overview|Page 1801 > < Initial Inspection and Diagnostic Overview|Page 1799
Page 127
background image

STEP 9. Check the horn. Connect the battery as shown, and Verify that the horn sounds.

Q: Is the horn normal?

YES: Go to Step 10.

NO: Replace the horn. Verify that the horn sounds normally.

STEP 10. Check horn relay connector A-05X for loose, corroded or damaged terminals, or terminals pushed back in the connector.

Q: Is horn relay connector A-05X in good condition?

YES: Go to Step 11.

NO: Repair or replace the damaged component(s). Refer to Harness Connector Inspection. Verify that the horn sounds normally.

Initial Inspection and Diagnostic Overview|Page 1801 > < Initial Inspection and Diagnostic Overview|Page 1799